Model B3/30AC

3 Wheel VNA Bendi

The B3/30AC replaces the original B3/30 SEPEX model with a new AC powered model. Faster performance, improved control and greater power efficiency are the 3 main features of this new model. All the maintenance benefits of our existing 4 wheel AC models are now available on this unit, including no power steering motor and no motor brushes on the traction or hydraulic motors.


Media
Literature
CLICK HERE FOR SPEC SHEET
CLICK HERE FOR PRINTABLE SPEC SHEET
CLICK HERE FOR PRINTABLE FLYER
Photo Gallery and Videos
  BENDI B3-30AC VIDEO

Features

  • Basic Capacity - 3,000 lbs. (1,363 kg) at 24" (600mm) Load Center
  • Triple Masts with Lift Heights to 30’ (9.14M)
  • AC Traction Motor and Controller
  • AC Hydraulic Controller
  • 110 FPM Lift Speed and 6 MPH Travel Speed
  • 200° Articulation for Easy Load Insertion and Retrieval
  • 72" (1.8M) Stacking Aisle with 48" x 40" (1.2M x 1M) Load
  • 11.2" (285 mm) Stroke Integral Sideshifter
  • Warehouse Truck Replaces Reach Trucks
 
  Bendi Model B3/30 SEPEX Bendi Model B3/30 AC
Traction Motor Controllers Single Curtis SepEx Single Curtis AC
Traction Motors 5.5 kW SepEx 5.1 kW AC
Hydraulic Motor 11 kW 14.5 kW
Hydraulic Motor Controller Curtis Series (No Controller for Steering) Curtis AC for Hydraulic Functions and Steering
Steering Motor Contactor On/Off Single Hydraulic Motor for Hydraulic Functions and Steering
Contactors 1 Controller On/Off Cold Contactors 1 Controller On/Off Cold Contactors
  1 Power-Steering Motor Contactor No Power-Steering Contactor
Motor Brushes Traction Motors No Motor Brushes
  On Main Hydraulic Motor Single AC Hydraulic Motor for Hydraulic Functions and Steering
  On Power-Steering Motor No Separate Power-Steering Motor
Motor Brush Wear Indicators On all Motors with Dash Display Not Required, No Brushes
Lift Speeds 70 FPM Loaded / 90 FPM Empty 90 FPM Loaded / 110 FPM Empty
Lowering Speeds 90 FPM Loaded / 60 FPM Empty 100 FPM Loaded / 90 FPM Empty
Travel Speeds 5.5 MPH Loaded / 6 MPH Empty 5.5 MPH Loaded / 6 MPH Empty
Dash Display Hourmeter BDI and Brush Wear and Overheat Indicators Curtis Engage IV, BDI, Hour Meter, Diagnostics, Steering, Lift and Accelerator Calibration on Dash
Valve Location Near Operator‘s Hand Below Floorboard, No Heat Exposure to Operator
Steering Efficiency Full Time Power-Steering On Demand Power-Steering
Overall Efficiency 5-6 Hour Run Time on Single Battery 8-9 Hour Run Time on Single Battery
Seat Sears Cloth Sears Cloth
Steering Control Integration None Land Active Control Provides Additional Control During Stacking as the Maximum Truck Speed is Controlled by Steering Angle