2100 Coulter Chisel
Proven Concept/High Capacity Design
The coulter chisel concept has been used for decades as an alternative primary tillage practice. The Landoll 2100 Series Coulter Chisel incorporates this concept into high capacity – that translates to handling heavy residue at higher speeds with maximum efficiency. Available in working widths from 8’ 9” to 31’ 3”, these units will work with a wide range of tractor sizes and provide ultimate productivity for nearly any operation. The concept combines straight cut 22” coulters, spaced at 7 1/2”, with high clearance chisel shanks, spaced at 15”, for fracturing the soil while sizing and blending the residue. Shanks are arranged to follow a coulter and have one in between each for optimum sizing.
- Laser Cut, Robotically Welded Frame
- 5 1/2” Lift Axles with Maintenance-Free Lift System
- Walking Tandems on All Sizes Except 7- Shank Models
- Slip-In Spindles
- 12.5L x 15-12 Ply or 32/1550 x 16.5L Tires (Model Dependent)
- Self-Leveling Hitch
- Cast Single Lip Hitches Cat. III on 7 and 9 Shanks; Cat. IV on 11 Shanks and Larger
- Single Point Depth Control
- 22” Coulters with 7 1/2” Spacing Provides Each Shank with Leading Coulter
- Solid Cast Coulter Spools
- 1 3/4” Gang Bolt
- Trunnion Mount Bearings
- C-Cushion Bearing Mounts
- Auto-Reset Shanks with 32” Under Frame Clearance
- Rigid Shear Bolt Shanks with 32” Under Frame Clearance
- Choice of Straight or Twisted Points and Shovels
- Adjustment/Maintenance Wrenches
- Blue Powder Coat Paint
- Safety Warning Lights
Standard Specifications
Disc Gangs:
- 22” coulters on 7½” spacing Round 1¾” gang shaft
- Cast spools, 5¾” diameter
- Trunnion bearings with triple-lip seal
- C-cushion bearing standards (1” x 2½”)
- Scraper mounting bracket attached to the C-cushion bearing standard
Shanks:
- Auto-Reset: 1,750 lb. point load, 14” trip height, 32” under frame clearance, and offset mounts
- Rigid Shear Bolt: 32” under frame clearance, and offset mounts on model 2131-25
Undercarriage:
- 5½” lift axles with maintenance-free lift system
- Walking tandems with greaseable bearings on all sizes except the 7 shank (single wheels only)
Spindles, Tires & Wheels:
- (2) 12.5L x 15, 12-ply tires with 6-bolt wheels and 2” slip in spindles on 7 shank models
- (4) 12.5L x 15, 12-ply tires with 8-bolt wheels and 2¼” slip in spindles on 9-15 shank rigid frames
- (4) 12.5L x 15, highway service tires (Load F), with 8-bolt wheels and 2¼” slip in spindles on wings on model 2131
- (4) 32/1550 x 16.5 SL tires with 8-bolt wheels and 3” slip in spindles on center model 2131
Hitch:
- Self-leveling hitch with manual adjustment
- Cast single-lip with Category III on 7 and 9 shank models
- Cast single-lip with Category IV on 11+ shank models
Other:
- Single-point, front-mounted depth control
- Safety chain, light kit and SMV emblem
- Blue powder-coat paint
- Adjustment wrench
- Gang wrench
Optional Equipment
- Single-lip hitch, Category III or Category IV
- Rear tow hitch
- Rear tow hitch with hydraulic hoses for secondary machine
- Rear jack stand
Choice of Points or Shovels:
- 4” twisted shovels
- 2” straight points in lieu of 4” twisted shovels
- 2” straight points with chrome cap in lieu of standard (for non-rocky areas)
Model Specifications
Your Content Goes Here